On startup, trig2disk reads the configuration file named on the command line. Commands in this file set all the parameters used for reading triglist2k messages and writing sac, ah, suds, gse, seisan, or tankplayer format. In the control file, lines may begin with a valid trig2disk command (listed below) or with one of 2 special characters:
Command names must be typed in the control file exactly as shown in this document (upper/lower case matters!).# marks the line as a comment (example: # This is a comment).
@ allows control files to be nested; one control file can be
accessed from another with the command "@" followed by
a string representing the path name of the next control file
(example: @memphis.scnl).
#
# Configuration file for trig2disk:
# I listen to trigger messages (TYPE_TRIGLIST), and stuff the implied pieces
# of trace data into an Oracle server. I do this by going to any number
# of WaveServerV's, as listed in this configuration file.
#
MyModuleId MOD_TRIG2DISK
RingName HYPO_RING
HeartBeatInt 30
LogFile 1 # 0 means don't create a disc log file. 1=> do.
# 2 means log to disk file but not stderr/stdout
#
# What message logos to listen to. Can be more than one.
# The type is hard coded to TYPE_TRIGLIST
#
GetEventsFrom INST_MENLO MOD_WILDCARD
#
# list of ip addresses and ports of the WaveServers we're to use
#
WaveServer 111.222.33.444 16022
# Optional NEW COMMAND in EW v7.3 Postproc allows running of a program or script that will process new files
# no arguments are sent to the script...It should know where to run and what to do with new files:
#
#Postproc myscript # the myscript or program should be in the params directory or an absolute path must be provided.
#
# If a WaveServer doesn't talk to us in this
# many seconds, we'll abort that request
#
TimeoutSeconds 30
#
# Max number of traces we'll ever see in one event
#
MaxTraces 500
#
# kilobytes of the largest trace snippet we'll ever have to deal with
#
TraceBufferLen 1000
#
# Debug switch: Debug will be logged if uncommented
#
Debug
#
# SCNL list of stations to write for each trigger message, these get
# written in addition to SCNLs in the trigger message.
#
#@memphis.scnl
#
# Minimum number of seconds to save for extra channels that we
# are saving (i.e., those channels not in the TYPE_TRIGLIST message)
#
MinDuration 30
#
# number of sample periods after which we declare a gap
#
GapThresh 100
# Optional queue commands
# Number of trigger messages to hold in queue; default is 10
#QueueSize 10
# Optional queue dumpfile name, for saving state of queue
QueueFile trig2disk.que
# Optional delay time: trig2disk will wait this many seconds from the
# time it receives a trigger message until it starts to process the message
DelayTime 5
#
# Select format of output data and the directory where it is written
# Only one of the following pairs should be uncommented.
#
#
# SUDS
#
#DataFormat suds
#OutDir "/home/earthworm/SUDS"
#
# SAC
#
DataFormat sac
OutDir "c:\earthworm\SAC"
#
# AH
#
#DataFormat ah
#OutDir "/home/earthworm/AH"
#
# SEISAN
#
#DataFormat seisan
#OutDir "/home/earthworm/seisan"
#
# GSE
#
#DataFormat gse_int
#OutDir "/home/earthworm/gse"
#
# Tankplayer
#
#DataFormat tank
#OutDir "./tanks/"
#
# Mini-SEED
# Mini-SEED output format is currently only available on Solaris
#
#DataFormat mseed
#OutDir "/earthworm/data/mseed"
#
# PSN4
#
# NOTE PSN4 output format is only avialable for WINDOWS!
# a station.lst file must also exist in the EW_PARAMS directory too (see example in docs)
#
#DataFormat psn4
#OutDir "c:\earthworm\psn4"
#
# Specify on what platform the output files will be used:
# intel or sparc - with this information, files will be written out
# in the correct byte order.
#
OutputFormat sparc
Below are the commands recognized by trig2disk, grouped by the function they influence. All of the required commands must be specified in the control file in order for trig2disk to operate.
Earthworm system setup:
Debug optional
GetEventsFrom required
HeartBeatInt required
MyModuleId required
RingName required
Waveform Control:
DelayTime optional
GapThresh required
MaxTraces required
MinDuration required
QueueSize optional
TimeoutSeconds required
TraceBufferLen required
TrigStation optional
WaveServer required
Output Control:
DataFormat required
LogFile required
OutDir required
OutputFormat required
QueueFile optional
Postproc optional
In the following section, all configuration file commands are listed in alphabetical order. Listed along with the command (bold-type) are its arguments (in red), the name of the subroutine that processes the command, and the function within the module that the command influences. A detailed description of the command and is also given. Default values and the values used by Memphis are listed after each command description.
command arg1 processed by function
DataFormat string putaway Waveform controlSets the format of the output waveform files. Valid strings defining format to use are:
ah
sac
suds
tank
gse_int
seisan
mseed - solaris only
psn4 - windows only
wfdisc - linux only
Only one data format can be used for a given instance of trig2disk. The ah format is xdr. The sac format is not xdr. The suds format is the PC Suds standard. The tank format is suitable for playing through the earthworm tankplayer utility. The gse_int format is GSE 2.0. The seisan format is suitable for use by Seisan. The putaway routines used were contributed by various authors and it is assumed that the user is familiar with the details of individual formats and they are not explained here.Default: none
Example DataFormat sac
Debug flagUncomment to turn on debugging information.
DelayTime nsec SnippetMaker Waveform controlSets the time (in seconds) to wait after dequeueing a type_triglist2k message and before attempting to process the message. Some scnl's may have longer time length data packets or other latencies making it possible to generate a trigger message before all data are available in a waveserver. DelayTime allows a mechanism to account for this latency. Large delay times in a busy queue could cause missed messages.Default: 0
Example DelayTime 5
GapThresh nsamp PA_next Waveform controlSets the gap threshold to G sample intervals. Trace data
packets are timestamped with a start time and a stop time, the times of the
first and last samples in that packet, respectively. Thus, the expected gap
between end time of one packet and the start time of the next packet is one
sample interval. Some data sources, such as older digitizers, produce data
with slightly larger or smaller intervals between them. The gap threshold is
intended to provide a means of detecting missing packets, without falsely
declaring a missing packet because of sloppy timestamps. The preferred value
for this gap threshold is 1.5. Set larger values only if you have a sloppy
data source. It is not clear how wave_serverV should handle intervals of much
more than one sample interval between packets if these are not caused by
missing packets.Default: none
Example GapThresh 1.5
GetEventsFrom logo trig2disk_config Earthworm setupControls the TYPE_TRIGLIST2K messages input to trig2disk. Trig2disk will only process TYPE_TRIGLIST2K messages that come from module mod_id at installation inst.
inst and mod_id are
character strings (valid strings are listed in earthworm_global.d and
earthworm.d) which are related to single-byte numbers that uniquely identify
each installation and module (please do not modify earthworm_global.d).
Multiple "GetEventsFrom" commands may be issued; wildcards
(INST_WILDCARD and MOD_WILDCARD) will force trig2disk to process all
trigger messages, regardless of their place of origin.Default: none Example GetEventsFrom INST_WILDCARD MOD_WILDCARD GetEventsFrom INST_MEMPHIS MOD_CARLSUBTRIG
HeartBeatInt nsec trig2disk_config Earthworm setupDefines the number of seconds nsec between TYPE_HEARTBEAT
messages
issued by trig2disk.Default: none Example: HeartBeatInt 15
Logfile switch trig2disk_config Earthworm setupSets the on-off switch for writing a log file to disk. If switch is 0, no log file will be written. If
switch is 1, trig2disk will log to stderr/stdout
and to a daily log file(s) called paramfile_ccyymmdd.log
where paramfile is the config file (so-called .d) of a particular instance
of trig2disk
and ccyymmdd is the current UTC date (ex: 20060123) on the system clock.
The file(s) will be written in the EW_LOG directory (environment
variable).
If switch is 2, only the log file is used
and not stderr/stdout.Default: none
Example: LogFile 1
MaxTraces int trig2disk_config Waveform controlThis is the maximum number of traces in a given triglist2k message that we'll ever have to deal with (e.g. individual scnl's). If the total number of traces from any incoming triglist2k message exceed this value, only MaxTraces number of traces will be saved. Excessively large values for this parameter may cause trig2disk to use an excessively large amount of memory as sufficient memory will be allocated to buffer this many traces.Default: none
Example: MaxTraces 1024
MinDuration int trig2disk_config Waveform controlThe value of the MinDuration parameter defines the minimum number of seconds to save for each additional scnl trace configured using the TrigStation parameter. For added scnl's not in the triglist2k message, start-time will be the earliest value of all scnl's in the triglist message, and duration will be the longest value of all scnl's in the triglist message. If the resulting duration is less than MinDuration seconds, then MinDuration seconds will be saved.Default:
Example: MinDuration 30
MyModuleId mod_id trig2disk_config Earthworm setupSets the module id for labeling all outgoing messages. mod_id is
a character string (valid strings are listed in earthworm.d) that
relates (in earthworm.d) to a unique single-byte number.Default: none Example: MyModuleId MOD_TRIG2DISK
OutDir path trig2disk_config Output controlTrig2disk will create a separate subdirectory for each event within the directory configured by OutDir. Specific naming conventions for subdirectories and files are output format dependent but generally based on trigger time in the triglist2k message.Default: none
Example: OutDir /export/home/ew/sac
OutputFormat string trig2disk_config Output controlSets the byte order of binary waveform files that trig2disk will write. Either intel or sparc are acceptable strings. This parameter should be configured for the platform on which the output datafiles are going to be read.Default: none
Example: OutputFormat sparcPostproc string trig2disk_config Output control
Runs the script/program associated with string with no arguments AFTER a trigger is converted to disk files.
Must be an absolute path to the script/program to be run. Otherwise, the script must
be located in the params (EW_PARAMS) directory. THe program or script must be marked as executable.Default: none
Example: Postproc /home/ew/myscript_that_does_something_with_triggers
QueueFile file trig2disk_config Output ControlOptional parameter to save waveserver queue status. This allows trig2disk to save its message queue if a fatal error or stop or restart message is received. On next start, trig2disk will load the queue from this file and start message processing from there.Default: none
Example: QueueFile trig2disk.que
QueueSize int Trig2disk_config Output ControlControls the number of triglist2k messages to hold in the queue. No more than this many messages will be dumped to the file configured in QueueFile parameter and subsequently processed on restart.Default: 10
Example: QueueSize 10
RingName ring trig2disk_config Earthworm setupTells trig2disk which shared memory region to use for input/output. ring is a character string (valid strings are listed in e
arthworm.d)
that relates (in earthworm.d) to a unique number for the key to the
shared memory region.Default: none
Example: RingName HYPO_RING
TimeoutSeconds int trig2disk_config Waveform controlIf a wave_server doesn't respond to any interaction within TimeoutSeconds number of seconds, bail and move on to the next waveserver in the list.Default: none
Example: TimeoutSeconds 30
TraceBufferLen int trig2disk_config Waveform controlThis parameter sets the number of kilobytes trig2disk will ever have to deal with for a given trace. Make sure it is large enough for expected sample rates and durations (a single floating point sample is generally 4 bytes on most platforms).Default: none
Example: TraceBufferLen 1000
TrigStation scnl trig2disk_config Output controlOptional SCNL list of channels to write for each trigger message. These get get written in addition to those in the trigger message. Trace start will be set to the earliest of any scnl in the trigger message and duration will be the longest of any scnl in the trigger message (but always at least MinDuration seconds long).Default: none
Example: TrigStation SWET HHZ ET --
WaveServer ip port trig2disk_config Waveform ControlList of waveserver ip address and port from which to gather traces. Can have multiple waveservers configured.Default: none
Example: WaveServer 111.222.33.444 16022
Module Index | Trig2disk Overview
Contact: Questions? Issues? Subscribe to the Earthworm Google Groups List.