config_ws will poll a WAVE_RING and find all TRACEBUF or TRACEBUF2
messages and build the WaveServerV tank files for all SCN or SCNL's it
finds.
Below is a copy of the .d file with detailed notes on each parameter
#
# config_ws.d
#
# General Info
MyModuleId MOD_CONFIG_WS # Module id for this instance of ringtocoax
RingName WAVE_RING # Shared memory ring for input/output
HeartBeatInterval 30 # Seconds between heartbeats, if 0, no heartbeats
# will be sent.
LogSwitch 1 # If 0, turn off disk log file
# If 1, log to disk file and stderr/stdout
# If 2, log only disk file
# Message Settings
MsgMaxBytes 4096 # Size of biggest message to be sent. Required
TraceType SCNL # The input trace stream type:
# SCNL - For SCNL data.
# SCN - Fir SCN data.
# Default is SCNL.
# Queue Settings
InputQueueLen 1000 # The Desired Size of the Input Queue in Messages
# Default is 1000
# Table Settings
TableSize 2000 # Maximum number of stations in the station table
# Default is 2000
StationFile stations.bin # File to save the station information to on shutdown.
# Required
# Tank settings
DaysToSave 3 # Number of days of trace each tank file should save. Required
IndexSize 10000 # The desired index size for each tank, default is 10000
MessageSize -2 # The desired message size for each tank
# If -1, the message size is the max message seen for
# each SCNL.
# If -2, config will calcuate the max message size based
# on the max message size seen, and the difference
# between the max and min sizes.
# Default is -1
EnforceLimit 1 # WaveserverV has an inherent maximum tank size of
# 1 gigabyte, if this flag is set, config_ws will
# not allow any tank to be larger than 1 gigabyte
# Default is 0
# Output Settings
OutPath c:\hydra\ws_internal\run_ws\newtankfiles
# Full path to write the generated files too. Required
FileWriteInt 600 # Time in seconds between writes of generated files to disk
# Default is 300 seconds
SortBy SCNL S # Controls how the program sorts the tanks
# SCNL - sorts the tanks by the SCNL where:
# S = SNLC
# C = CSNL
# N = NSLC
# L = LSNC
# Logo - sorts the tank by the Logo
# and then by SNLC.
# Default is SCNL S
ForceInstIdToWild 0 # Force the Installation ID to INST_WILDCARD, default is 0
# Note: If the InstID in the logo is not matched in the
# earthworm_global.d the string "inst_unlisted" will be written
# for the InstID.
ForceModIdToWild 1 # Force the Module ID to MOD_WILDCARD, default is 0
# Note: If the ModID in the logo is not matched in the
# earthworm.d file the string "mod_unlisted" will be written
# for the ModID.
# If the InstID in the logo is not the same as the local one
# the string "Mod_NotLocal" will be written for the ModID
# Hard Drive settings:
# Note: If no hard drives are specified,
# config_ws will create one file
# Max # of hard drive definitions is 100
# Name is used to construct the tankfile name
# Path is the full path to the tanks on that waveserver
# Size is the size of the waveserver in megabytes.
#
# Name Tank Path Size
Harddrive E E:\hydra\tanks\ 67000
Harddrive F F:\hydra\tanks\ 67000
Harddrive G G:\hydra\tanks\ 67000